SCHMIDT® Single workstations – Safety concepts

Two-hand and automatic operation can be carried out using the press control unit SCHMIDT® PressControl 3000.
SCHMIDT® single workstations are EC type-approved. Safety devices including pneumatic system exist twice in all models.

Two-hand safety switching

In basic design, SCHMIDT® PneumaticPress and HydropneumaticPress are operated with
two- hand safety switching. The user must keep both switches in release position. If one switch is released ahead of time, the press stroke is interrupted. This applies to all positions above the automatic stroke takeover that is started from the point where the dangerous closing movement is finished. From the stroke takeover, the stroke is continued automatically.

Light curtain with transparent protective housing

The light curtain control provides optimum safety to the user. The danger area is protected with macrolon windows against contact. A light curtain protects the access to the danger area on the side of insertion. The working process is immediately interrupted and the press is stopped when intervening. The cycle can be continued automatically after leaving the danger area. In combination with SCHMIDT® ServoPress, the light curtain control is the basic version. The press can be activated via the light curtain. Depending on the application, it can be selected between 1-cycle and 2-cycle activation.

Transparent protective housing with pneumatic sliding door

The version with pneumatically operated safety door is completely protected with macrolon windows. First, the safety door is closed and locked via hand or foot switch. This is two-channel monitored. As soon as the door is locked, the press process is automatically started.